(PARIS) — Microwave Vision Group (MVG) is proud to have been part of a European project to develop a new antenna for the tracking of oceangoing vessels from space via satellite.
A VHF array antenna was designed for mini-satellite platforms in low Earth orbit. In partnership with CGS, who piloted the project, MVG Italy developed the electromagnetic design, and manufactured and tested the array antenna.
What might look like an abstract artwork is actually a novel antenna, small enough for a mini-satellite, to track global ship traffic from orbit.
Commercial vessels are mandated to transmit automatic identification system (AIS) signals, which are used to track maritime traffic — the oceangoing equivalent of air traffic control. The system relies on VHF radio signals with a horizontal range of just 40 nautical miles (74 km), useful within coastal zones and on a ship-to-ship basis, but leaving open ocean traffic largely uncovered.
However, in 2010 the European Space Agency (ESA) fitted an experimental antenna to Europe’s Columbus module of the International Space Station, demonstrating for the first time that AIS signals could also be detected from up in orbit, opening up the prospect of global ship tracking from space.
“Based on our testing, this new prototype designs offers a four-fold increase in ship detection performance,” said ESA antenna specialist Nelson Fonseca, overseeing the project. “The AIS detection system on Columbus employs a low-gain ‘whip’ antenna, receiving signals within a very broad beam, with corresponding potential for signal overlap and interference. This antenna design combines higher-gain with a more reduced footprint, allowing more of a focus on regions of highest interest, and can also discriminate between polarizations, increasing the likelihood of detection for any individual AIS signal within the antenna field of view.”
In addition, clever engineering has shrunk the overall antenna size to a size where up to five could be hosted on a single cubic-metre mini-satellite.
“Despite its name, VHF is quite a low wavelength in space terms, implying a bulky antenna of about 1 meter across and half-a-meter thick to operate ideally at that frequency,” Nelson said. “But the patterned square-shaped structure on the underlying face of our antenna changes the signal behavior, enabling us to shrink the design to 50 cm width and 3 cm thickness — making it suitable for hosting on a smaller platform.”
The antenna was developed through ESA’s ARTES Advanced Research in Telecommunications Systems-Advanced Technology program with Italian companies CGS as prime contractor and MVG as subcontractor in charge of the electrical design.
“CGS and MVG are highly interested in moving forward with the optimization and environmental qualification of this outstanding antenna element,” said Andrea Di Cintio, managing the project at CGS. “The next step will be to identify a specific mission and then optimize the design and qualification accordingly.”
“Significant reduction of antenna dimensions and weight without compromising electrical performance was challenging,” said Andrea Giacomini, lead antenna designer at MVG. “It required a radical change in the design and validation approach. We are proud to have been involved.”