(SEATTLE) — The U.S. Coast Guard continues to monitor containerships anchored in the Puget Sound area due to a logistics backlog affecting the entire West Coast of the United States and Canada from Los Angeles to Prince Rupert, British Columbia.
This unprecedented backlog has resulted in a greater number of ships, in particular containerships, utilizing anchorages in Puget Sound.
As of Sept. 23, the following is the status of suitable anchorages for containerships in the Puget Sound area:
Anchorage location capacity/Currently present
Holmes Harbor 4/4
Bellingham Bay 2/0
Port Gardner 1/1
Elliott Bay West 1/1
Yukon Harbor 5/2
Several factors determine what constitutes a suitable anchorage, particularly for a vessel the size of the large containerships that typically transit through Puget Sound ports.
“The Salish Sea and Puget Sound is blessed by deep waters. This helps us avoid disasters of ships running aground with potential oil pollution,” said Laird Hail, director, Puget Sound Vessel Traffic Service. “However, the deep waters limit the number of locations we can use for anchorages. Containerships have gotten larger since some of our anchorages were established, and as a result, many of the anchorages are no longer suitable for these ships.”
Holmes Harbor, off Whidbey Island, is one such federal anchorage in the Code of Federal Regulations (33 CFR 210.230). Due to a lack of capacity available elsewhere, it is currently serving as an anchorage location. Even though Holmes Harbor is a designated anchorage, the Coast Guard does not generally need to use Holmes Harbor. This is similar to several other anchorages, such as Bellingham Bay and Port Gardner.
“Holmes Harbor is way off the beaten path, requiring lengthier rides for vessel pilots, and is further from the vessels’ ultimate destination,” said Hail. “We’ve only used Holmes Harbor once before on a similar basis in the last 15 to 20 years, and that was during the 2014-2015 slowdown caused by labor disputes resulting in a similar backup. As soon as the congestion resolves to where it is not necessary to use Holmes Harbor, we will return to using it only as an overflow location.”
Coast Guard Sector Puget Sound has received a number of reports of excessive noise and lights from vessels anchored at various anchorages in Puget Sound. Vessels do not run their propulsion engines unless it is excessively windy (gales and above) and need to use propulsion to avoid dragging anchor. Reports of low-hum noise are likely due to generators, which containerships have to use to produce electricity.
The ships should not be using bright halogen or similar type lights. Deck lights, however, are necessary for the safety of personnel. The pilots discuss light usage before they leave the vessel, and the Coast Guard makes a nightly broadcast over the radio (approximately a half-hour after sunset) to remind vessels to use minimal lighting.
Sector Puget Sound is working closely with Puget Sound Pilots in reviewing criteria that determines which vessels can use specific anchorages. The Coast Guard relies upon the expertise of the pilots in handling ships and their familiarity of the constraints of each anchorage to manage, to the safest extent possible, their use.
The captain of the port is encouraging containership stakeholders such as the Northwest Seaport Alliance, the Pacific Merchant Shipping Association, the Port of Seattle, Port of Tacoma, and terminal operators to develop new processes for container ship queuing to manage vessel arrivals efficiently and reduce the demand and load on anchorages.
If people in the area believe the vessels are producing excessive lighting or noise, call the on-duty watch supervisor at (206) 217-6152. The Coast Guard will contact the vessel or their agent and attempt to have them correct the situation.
Additional questions or concerns regarding anchored containerships in the Puget Sound area can be emailed to D13-SMB-D13-PugetSoundAnchorage-Inquiries@uscg.mil
– U.S. Coast Guard
